Streamer GTR SIR-GTRV1 Vehicle Kit Installation Guide
3
Safety Precautions
Warning
Take the following precautions to prevent traffic
accidents and avoid personal injury:
• Installation must be performed according to this
installation guide. Brix Labs is not responsible
for issues arising from installations not
performed according to the procedures in this
guide.
• Do not install the Receiver where it may
obstruct your view through the windshield or
your vehicle’s indicator displays.
• Do not install the Receiver where it may hinder
the function of safety devices such as an
airbag. Doing so may prevent the airbag from
functioning properly in the event of an accident.
• The installation and use suggestions contained
in this manual are subject to any restrictions or
limitations that may be imposed by applicable
law. The purchaser should check applicable
law for any restrictions or limitations before
installing and/or operating this Receiver.
Caution
Take the following precautions to keep the Receiver
in proper working order:
• Be sure the Receiver is connected to a 12V
DC power source with a negative ground
connection.
• Do not install the Receiver where it will be
exposed to high levels of humidity, moisture, or
dust.
• When replacing the fuse, use only a new fuse
with the proper rating. Using a fuse with the
wrong rating could potentially cause damage to
the Receiver in the event of a short circuit.
• Failure to follow these safety precautions may
result in a serious accident.
!
!
