SL100TK1C
[
Warning and Safety Information
]
Warning and Safety Information
IC Caution
Operation is subject to the following two conditions: (1) this device may not cause interfer-
ence, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication. This device has been designed to operate with an
antenna having a maximum gain of 2 dBi. Antenna having a higher gain is strictly prohibited
per regulations of Industry Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
permitted for successful communication.
imPorTanT noTe:
iC radiation exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC
RSS-102 and had been tested in accordance with the measurement methods and procedures
specified in IEEE 1528. This equipment should be installed and operated with minimum dis-
tance 1.5cm between the radiator & your body.
Body Worn Operation
To maintain compliance with IC RF exposure requirements, use only belt-clips, holsters
or similar accessories that does not contain metallic components in its assembly. The
use of accessories that do not satisfy these requirements may not comply with IC RF
exposure requirements, and should be avoided.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
