background image

10

SIRIUS/DBS Signal Combiner/Splitter Installation Guide

3. Connect one end of the 3 ft. RG-6 cable (shown as 

F

 on page 3) to the device

from which the cable in Step 2 was disconnected (i.e., the satellite dish LNBF, or
the multiswitch, or the signal splitter, etc.).

4. Connect the other end of cable 

F

to the Signal Combiner connector
labeled 

DBS IN

. When connected,

be sure to slide the rubber boots
on each end of the cable over the
connections to protect the
connections from the weather
elements.

5. Connect one end of the 30 ft. RG-

58 cable (shown as 

E

 on page 3)

to the SIRIUS outdoor antenna.

6. Connect the other end of cable 

E

to the Signal Combiner connector
labeled 

SIRIUS IN

. When

connected, be sure to slide the
rubber boots on each end of the
cable over the connections to protect the connections from the weather elements.

Indoors:

1. Install the Signal Splitter (shown as 

B

 on page 3) near to where the cable which

brings the signal from the satellite TV dish terminates. Use the provided screws
for mounting.

2. Disconnect the cable which brings the signal from the satellite TV dish from the

device that it is connected to (i.e., a Receiver/Tuner, or a Multiswitch, or a
DishPro Adapter, etc.), and connect this cable to the Signal Splitter connector
labeled 

COMBINED IN

. When disconnecting this cable,

make a note of where it was connected for the next
installation step.

3. Connect one end of the 10 ft. RG-6 cable (shown as 

H

 on

page 3) to the device from which the cable in Step 2 was
disconnected (i.e., the Receiver/Tuner, or the Multiswitch,
or the DishPro Adapter, etc.).

4. Connect the other end of cable 

to the Signal Splitter

connector labeled 

DBS OUT

.

5. Connect one end of the 10 ft. RG-58 cable (shown as 

G

 on page 3) to the Signal

Splitter connector labeled 

SIRIUS OUT

.

6. Connect the other end of cable 

G

 to your SIRIUS receiver.

SPLITTER

COMBINED IN

DBS
OUT

POWER

IN

SIRIUS

OUT

COMBINER

SPLITTER

CABLE "

E

"

CABLE "

F

"

EXISTING

SATELLITE

TV CABLE

CABLE "

H

"

CABLE "

G

"

SIRIUS
RECEIVER

RECVR/TUNER

"

A

"

"

B

"

"

C

"

Summary of Contents for SR-100C













Reviews: