[
Installation
]
1
feet and grommet prevent the dock from sliding when installed on a flat surface.
Method 2:
Removing the rubber feet
E
and grommet
F
(pre-installed on the dock,
see Figure 2) and attaching the pedestal mount to the dock using the four mount-
ing screws
A
, and securing the pedestal mount to the vehicle using the adhesive
on the pedestal foot. (Figure 3) You can also attach the pedestal by using two
screws (not supplied) through the optional mounting holes in the pedestal foot.
Rubber Feet (E)
Grommet (F)
Mounting
Screw (B)
figure 2
figure 2
