[
Connections
]
Connections
Connector Information
Figure 1 identifies and describes the connectors on the SCC1 Tuner. Figure 2 identi-
fies the 8-pin pin-out configuration.
SC OUTPUT:
Connection for the SiriusConnect Interface Cable.
ANTENNA:
Connection for the satellite antenna.
•
•
6
7
3
1
4
8
1
Battery
2
Power Enable
3
Serial Data (RX)
4
Ground
5
Audio Right
6
Serial Data (TX)
7
Audio Ground
1
Audio Left
5
2
Note 1: The Serial Data TX and RX lines in the SiriusConnect Interface cable are crossed.
Note 2: The Audio output is 1volt RMS.
Note 3: Only use SIRIUS approved antennas with this tuner.
figure 1
figure 2
Antenna
Connection
Connect to Sirius-Ready
Headunit or SiriusConnect
Interface Translator
