28 SIRIUS LCD Wireless Controller
Excluding a Node or Radio from
the Network
To exclude, or delete, a node or radio
from the network, perform the
following steps:
1.
Press and hold
SET
until the LCD
displays
Initial Setup
.
2.
Press
Scroll
Left
(
) or
Scroll
Right
(
) until the LCD displays
SIRIUS SETUP
. Press
OK
.
3.
The LCD displays
Nodes
. Press
OK
.
4.
The LCD displays Add Radio to
Network. Press
Scroll
Left
(
) or
Scroll Right
(
) until the LCD
displays
Delete Radio From
Network
. Press
OK
.
5.
The LCD displays Push Button on
Radio. Press the Reset button on
your Sirius Conductor SC-H1W
tuner or third-party node.
6.
The LCD displays
successful
when you have successfully
deleted (excluded) the radio.
7.
After successful deletion, use
NETWORK RESET to execute a
reset. The radio or node is now
excluded form the network (See
“Network Reset” on page 27.).
Including a Third-Party
Manufacturer Node in the
Network
To increase the RF range of
communication to your SIRIUS radio,
you can include a third-party
manufacturer node in the network. To
include a third-party node in the
network, do the following:
1.
Go to
SIRIUS SETUP
and select
ADD
RADIO TO NETWORK
.
2.
See “Adding a Node” on page 18.
Replicating a Remote Control
By replicating a remote control, you
can use another remote control on the
same SIRIUS radio (creating a
secondary remote). Perform the
following steps:
1.
From
SETUP
, go to
REMOTE COPY
.
Press
OK
.
2.
The LCD displays TRANSMIT
NETWORK AND DATA. Press
Scroll
Left
(
) or
Scroll Right
(
) to get to
TRANSMIT NETWORK
INFO ONLY
. Press
OK
.
3.
The LCD displays
Sending
until
replication has finished.
4.
The LCD displays
Successful
.
Remote Copy (Receive a Copy)
If you have another remote control you
want to use on the same SIRIUS
radio, perform the following steps:
1.
From
SIRIUS SETUP
, go to
REMOTE
COPY
.
2.
The LCD displays
TRANSMIT
NETWORK AND DATA
. Press
Scroll
Left
(
) or
Scroll Right
(
) to
get to
RECEIVE A COPY
.
3.
Press
OK
to receive a copy of the
network information.
4.
The LCD displays
RECEIVING
until
the remote completes the
replication process.
5.
The LCD displays
Successful
.
NOTE:
Copying the remote control to
use with the same Sirius Radio
may negatively impact
performance by slowing down
data transmission.
To use the Sirius remote to
replicate a third-party
manufacturer’s remote, follow the
same steps shown above
(“Remote Copy (Receive a
Copy)”). This causes the Sirius
remote to be part of that network
and also slows down performance
SIRIUSRadio.book Page 28 Tuesday, November 21, 2006 5:15 PM