5. Prog button
In this mode, you can program up to 20 tracks that are played one after the other.
•
Press STOP
•
Press PROG
•
Use TRACK SELECT Buttons to choose the required song and press PROG again.
•
Repeat these steps until you have save all required tracks.
•
Press PLAY/PAUSE to start the playing
6. Folder button
With this button you can navigate through the folder or USB or CD.
7. Search <<>> button
Search forwards or backwards through the current track.
8. Track Select |<<>>| button
With this button you can choose the previous or next song.
9. DSP/Brake
In playing mode first press BRAKE and then PLAY/PAUSE. The effect sounds like ending a
Turntable. Press PLAY/PAUSE again to stop the effect.
10. DSP Reverse
Press REVERSE to play the track backwards. If you press this button again you stop this
effect.
11. Scratch button
Press SCRATCH to activate the Scratch / Pitch-Bend and Search mode. You control these
effects with the JOG WHEEL. If the indicator is off, the player is in Pitch Bend mode. Press
SRATCH again to change to Scratch mode. Press SCRATCH a third time to get to the Search
mode.
12. Jog Wheel Shuttle wheel
Controls the mode selected with the scratch button. (Scratch/Search/Pitch Bend)
13. Cue button
Press CUE while playing the track to jump back to the point where you have started the track.
14. Play/Pause button
Every time you press this button you change the mode from Play to Pause or Pause to Play.
15. Direct Access buttons
With the buttons 0-9 you can select the tracks of the CD direct.
16. Display
The display shows the track, Track-number, time, remain, pitch continuous or single play
8 / 16
