Customer Service 1-888-707-1880
Maurice Pincoffs Canada Inc. ©2011
Or email us at [email protected]
7
STEP 4
1. Slide the seat (66) onto the rail (2). Attach the stopper bumper (56) to the rail (2) with
two button head bolt (22).
Note:
A second
stopper bumper (56) has
been assembled
at the factory.
2. Attach the rear stand (3) to the rail (2) with one hex bolt (59) and one lock washer (34)
from inside the rail (2) and two flat head bolts (57) from underneath. Tighten all three
bolts only after all three have been started. Press the rail cap (53) into the back end of
the rail (2).
STEP 5
1. Attach the rail (2) to the main frame (1) with one button head bolt (55),one washer (52)
and one acorn nut (51). Lock the rail (2) in position with the two locking pins (54).
2. Connect the sensor wire (68) to the
monitor
(67). Press the
monitor
(67) into the
opening in the Covers (10/84)
You have completed the assembly of your rower.
The monitor can only be powered by using the AA battery.
