12
SIRJVC1C Installation Guide
You must activate SIRJVC1C before
you can start to receive the SIRIUS
Satellite Radio broadcast.
1. Make sure that the SIRJVC1C is
properly connected and that its
antenna is oriented to receive the
SIRIUS satellite signal.
2. Turn on the headunit.
3. Press and release the SOURCE
button on the head unit to select
SIRIUS as the source. (Each press of
the SOURCE button will change to a
different audio source.)
4. The display will read “UPDATING” until
the SIR-JVC1 channel update is
completed. This is where the latest
channel line up is updated on the
SIRIUS Receiver.
NOTE: Don’t push any buttons or
perform any operations until
updating has been completed.
Once updated and the SIRIUS
channels are received, you will be
tuned to SIRIUS Satellite Radio’s
Preview Channel (Channel 184). You
should be able to hear the SIRIUS
Preview channel’s Audio.
5. Find the SIRIUS ID (SID) of your unit.
The SID can be found on a sticker on
the bottom of the SIRJVC1C or
through the PSM menu of your JVC
headunit. The PSM menu is typically
accessed by pressing the MENU
button or pressing and holding the
SEL button, depending on your
headunit. Use the channel keys to
navigate to the SID menu option.
Refer to your headunit documentation
for more information on how to access
the PSM menu.
6. The SID will be displayed. Write
down the 12 digit SID in the location
provided on the next page for future
reference.
7. Contact SIRIUS by calling toll-free at
1-888-539-SIRIUS (1-888-539-7474).
You will not be able to tune to any
other channels until you activate
your SIRIUS subscription.
Activating Your SIRIUS Subscription
Basic Operation
The SIRJVC1C SIRIUS Satellite Radio
Tuner is compatible with any JVC
headunit that is “Sirius Ready”. Consult
JVC or SIRIUS Customer Support for
more information about compatibility.
Please consult your JVC owner’s
manual for proper operation instructions
for using satellite radio products.
