Dismantling Procedure
Indoor Unit
Operating step
Photo
1. Remove the panel.
????????A?????A?????A????A
??? Remove the air strainers.
??? Remove two screw covers and take off
three screws of upper frame.
??? Remove the upper frame.
3. Remove the electric box
(1) Remove one scr ew of e lectric cover,
remove the electric cover.
(2) Remove the screw of earthing wire,
and take off the sensors.
(3) Remove the wires and one sc rew,
remove board and electric box.
A
A
4. Take off one screws of water-collecting
plate and remove water-collecting plate.
A
5. Take off two screws of left locating cover
and two screws of moto r fasten er. Remove
evaporator.A
6.Remove impeller fan and indoor motor
a) Remove the four screws of motor
fastener
b) Remove the screw of impeller fan.
Remove the motor and impeller.A
A
A
A
11
