SIRETTA QUARTZ-LITE Series, Software Manual

Page: 13 / 46

Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web +44(0)118 976 9000
sales@siretta.com
www.siretta.com
13
QUARTZ-LITE
Software Manual
Parameter Instruction
Destination Router can reach the destination IP address
Gateway Next hop IP address which the router will reach
Subnet Mask Subnet mask for destination IP address
Metric
Metrics are used to determine whether one particular route
should be chosen over another
Interface Interface from router to gateway
Description Describe routing name
Table 4. Routing settings instruction
After all settings have been configured, click the ‘‘Save’’ icon.
Industrial R210 Series Cellular Router User Manual
www.wlink-tech.com 19
Figure 3-4 Routing Setting
Table 3-4 Routing Setting Instruction
Parameter Instruction
Destination Router can reach the destination IP address.
Gateway Next hop IP address which the router will reach
Subnet Mask Subnet mask for destination IP address
Metric
Metrics are used to determine whether one particular route should
be chosen over another.
Interface
Interface from router to gateway.
Description Describe this routing name.
Step 2
Please Click “ Save “ to finish.
3.3
WLAN Setting
It’s mainly for router which support Wi
-Fi, you can modify and configure WLAN
parameter through Web GUI, below is the common setting
3.3.1
Basic Setting
Step 1 Click “WLAN - >Basic Setting” to configure relative parameter
Routing Settings
Step 1.
Select “
Basic Network > Routing”
to enter the Routing settings page.
Figure 8. Routing settings