MAKE CAPPUCCINO/ LATTE/ FROTHED
MILK
1.
Prepare espresso first with container big enough according to the part
“MAKE ESPRESSO”
, make sure
that steam control knob is at the
“0”
position.
2.
Press
FROTH
button, espresso indicator light will be extinguished, wait until frothing indicator light is
illuminated.
Note:
During operation, frothing indicator light will cycle on and off to maintain desired temperature.
3.
Fill a cup with about 3.3 ounces of milk for each cappuccino or about 8 ounces of milk for each latte to be
prepared, you are recommended to use whole milk at refrigerator temperature.
Note:
In choosing the size of cup, it is recommended the diameter is not less than 2.75 inches.
4.
Place a cup under the froth nozzle. Turn steam control knob slowly counterclockwise, work indicator light is
illuminated green, steam will come out from froth nozzle.
Note:
Never turn steam control knob rapidly, as the steam will accumulate rapidly within short time which
may increase a potential risk of explosion.
5.
Insert froth nozzle into the milk about two centimetres, froth milk in the way of moving cup circular and up
and down.
6.
When the milk doubles in volume and the required result is reached, turn steam control knob to the
“0”
position, work indicator light is extinguished.
Note:
Clean froth nozzle with wet sponge immediately after steam stops but be careful not to burn yourself.
7.
Pour the frothed milk into the prepared espresso, now the cappuccino is ready. Sweeten to taste and if
desired, sprinkle the froth with a little cocoa powder.
8.
Press
ON/OFF
button
to cut off power. All indicators lights will be extinguished.
Note:
If you want to brew coffee immediately after frothing milk, it is necessary to cool down Sirena
Espresso Machine as the temperature for brewing coffee is not as high.
Following are two methods to brew coffee after frothing milk.
A.
The faster method:
Turn steam control knob slowly counterclockwise, to release the steam until frothing
indicator light is extinguished, turn steam control knob to the
“0”
position. Reset the
FROTH
button to switch
back into the espresso mode.
B.
The normal method:
Reset the
FROTH
button, wait about 2 minutes until the thermometer falls back into
espresso range. After frothing indicator light is extinguished, espresso indicator light will be illuminated green.
After that, you can continue to make espresso.