Fig. 4.1
Fig. 4.2
Coil (44 holes)
Punch:
1. Select the appropriate coil size. This can be done using
the coil comb measuring guide.
2. Set punch depth control appropriately, corresponding to
the specific comb size being used.
3. Slide the margin guide to the left or right according to
the size paper being used to allow for proper paper
alignment.
4. Insert document to be punched into the coil comb punch
throat and align with paper stopper. (See Fig. 5.1)
5. Pull down on punch handle to punch paper. (See Fig.
5.2)
Fig. 5.1
Fig. 5.2
Bind:
1. Use the paper alignment tool to align the document.
(See Fig. 6.1)
2. Manually feed the coil into the first 4 or 5 holes of your
document. (See Fig. 6.2)
Fig. 6.1
Fig. 6.2
