manualshive.com logo in svg

Siqura HSD820 Series, User Manual, Page: 14 / 101

Share
Download
Siqura HSD820 Series User Manual Download Page 14

4

Access the webpages

The webpages of the HSD820 offer a user-friendly interface for configuring the settings of the
unit and viewing live video images over the network. This chapter explains how to connect to
the built-in web server.

In This Chapter

4.1 System requirements............................................................................................ 14

4.2 Connect via web browser....................................................................................... 14

4.3 Find the unit with Siqura Device Manager.................................................................15

4.4 Change the network settings with Siqura Device Manager...........................................16

4.5 Log on to the unit................................................................................................. 17

4.6 Install Siqura Viewer............................................................................................. 18

4.7 The HSD820 web interface..................................................................................... 18

4.1

System requirements

To connect to the HSD820, access its webpages, and view live video over the network, make
sure that your PC meets the following requirements.

Component

Minimum requirement

Personal computer

● Intel® Pentium® IV, 3 GHz or higher, Intel® Core2 Duo, 2 GHz

or higher

● 1 GB RAM or more
● AGP graphics card 64 MB RAM, DirectDraw

Operating system

Windows 7

Web browser

Internet Explorer 6.0 or later, Firefox, Chrome, Safari

Network interface
card

10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation

Viewer

ActiveX control plug-in for Microsoft IE

4.2

Connect via web browser

To connect to the unit via your web browser

1

Open your web browser.

2

Type the IP address of the HSD820 in the address bar, and then press ENTER.
The factory-set IP address of the HSD820 is in the 10.x.x.x range. You will find it printed
on a sticker on the unit.
If your network configuration is correct you are directed to the login page of the unit.

 14 

Summary of Contents for HSD820 Series






































































































Reviews:

No comments