EN
12
- Please check that the coupling of the high
pressure hose with the appliance and the gun
supplied as standard equipment made correctly,
that is to say without any water leak.
CARE AND MAINTENANCE
See fig.
N
The unit is maintenance-free.
•
XX WARNING: the machine shall be discon-
nected from its power source, by removing the
plug from the socket-outlet, during cleaning or
maintenance
•
WARNING: Do not spray the appliance with water
and do not use detergents or aggressive solvents.
Machine could be damaged.
-
Clean the exterior part of the machine with a dry cloth.
> STORAGE
See fig.
N
- Move the machine only by grasping the carrying
handle
- Store the appliance and the accessories in a frost-
safe room.
TROUBLESHOOTING
Appliance does not work
- Check whether the voltage shown on the rating
plate corresponds to that of the power source.
- Check the connector cable for damage.
Appliance does not reach operational pressure
- Vent the appliance: allow the pump to operate
without the high-pressure hose until water
appears at the high-pressure outlet without any
more bubbles. Then reattach the high-pressure
hose.
- Clean the strainer in the water connection.
- Clean the filter placed inside the hose coupling (if
set)
- Check the inlet water flow rate.
- Check all inlet pipes to the pump for leaks or
blockage.
Strong pressure fluctuations
- Clean the high-pressure nozzle. Remove dirt from
the nozzle hole with a needle and then rinse out
with water from the front.
Pump leaks
- 10 drops per minute are permissible. In the case
of more serious leakage, you should contact the
authorized customer service.
Replacement parts
- Use only original spare parts or spare parts
suggested by the manufacturer.
DISPOSAL (WEEE)
As the owner of electrical or electronic
equipment, the law (in accordance with
the EU Directive 2012/19/EU on waste from
electrical and electronic equipment and
the national laws of the EU Member States
that have implemented this Directive) prohibits
you from disposing of this product or its electrical /
electronic accessories as municipal solid waste and
obliges you to make use of the appropriate waste
collection facilities.The product can be disposed of
by returning it to the distributor when a new prod-
uct is purchased. The new product must be equiva-
lent to that being disposed of. Disposing of the
product in the environment can cause great harm to
the environment itself and human health.
The symbol in the figure indicates the urban waste
containers and it is strictly prohibited to dispose of
the equipment in these containers. Non-compliance
with the regulations stipulated in the Directive
2012/19/EU and the decrees implemented in the
various EU Member States is administratively pun-
ishable.