16
Ref. No.
Description
SIP Part No. Ref. No.
Description
SIP Part No.
1.
Handle
PW08-00460
14.
Castor
PW08-00476
2.
Motor top cover
PW08-00461
15.
Attachment holder
PW08-00474
3.
Switch
PW08-00462
16.
Collection bag
PW08-00477
4.
Motor base cover
PW08-00463
17.
Mains lead clamp
PW08-00479
5.
Motor upper seal ring
PW08-00464
18.
Mains lead
PW08-00480
6.
Motor
PW08-00465
19.
Capacitor
PW08-00481
7.
Motor lower seal ring
PW08-00466
20.
Extension tube
PW08-00482
8.
Air inlet
PW08-00467
21.
Foam filter
PW08-00483
9.
Float stop
PW08-00468
22.
Crevice tool
PW08-00484
10.
Filter basket
PW08-00469
23.
Hose 1.5 metre
PW08-00485
11.
Clamp
PW08-00470
24.
Brush
PW08-00487
12.
Hose connector
PW08-00471
N/A.
Motor brush (pair)
PW08-00491
13.
Container
PW08-00472
PARTS LIST
Optional Extras
Cartridge filter
PW08-00489
Filter lock
PW08-00490
5
contact with any earthed items (e.g. pipes, radiators, hobs and refrigerators, etc.). It is
advisable wherever possible to use an RCD (residual current device) at the mains
socket.
STAY ALERT:
Always watch what you are doing and use common sense. Do not oper-
ate a machine when you are tired or under the influence of alcohol or drugs.
DISCONNECT THE VACUUM CLEANER FROM THE MAINS SUPPLY:
When not in use, be-
fore servicing, empting the water container and when changing accessories such as
bags etc.
AVOID UNINTENTIONAL STARTING:
Make sure the switch is in the
OFF
position before
connecting the vacuum cleaner to the mains supply.
NEVER LEAVE THE VACUUM CLEANER RUNNING / CONNECTED WHILST UNATTENDED:
Turn off the vacuum cleaner and disconnect it from the mains supply between jobs.
Do not leave the vacuum cleaner until it comes to a complete stop.
DO NOT ABUSE THE MAINS LEAD:
Never attempt to move the vacuum cleaner by the
mains lead or pull it to remove the plug from the mains socket. Keep the mains lead
away from heat, oil and sharp edges. If the mains lead is damaged, it must be re-
placed by the manufacturer or its service agent or a similarly qualified person in order
to avoid unwanted hazards.
CHECK FOR DAMAGED PARTS:
Before every use of the vacuum cleaner, any part that
is damaged should be carefully checked to determine that it will operate correctly
and perform its intended function. Check for alignment of moving parts, free running
of moving parts, breakage of parts, and any other conditions that may affect its oper-
ation. A guard or other part that is damaged should be correctly repaired or replaced
by an authorised service centre unless otherwise indicated in this instruction manual.
Have defective switches replaced by an authorised service agent. Do not use the tool
if the switch does not turn it on and off.
USE ONLY RECOMMENDED ACCESSORIES:
Consult this user manual for recommended
accessories. Follow the instructions that accompany the accessories. The use of im-
proper accessories may cause hazards and will invalidate any warranty you may
have.
DO NOT OVERREACH:
Keep proper footing and balance at all times.
USE THE RIGHT MACHINE:
Do not use the vacuum cleaner or the attachment to do a
job for which it was not designed.
DO NOT OVERLOAD THE VACUUM CLEANER:
It will do the job better and more safely at
the rate which it was designed.
DO NOT EXPOSE THE VACUUM CLEANER TO RAIN:
Water entering the motor housing
will greatly increase the risk of electric shock.
SAFETY INSTRUCTIONS….cont
Stop operation immediately if you notice anything abnormal.
Be alert at all times, especially during repetitive, monotonous operations. Don't be
lulled into a false sense of security.
Do not modify the vacuum cleaner to do tasks other than those intended.
