6
freeze.
When not in use, always ensure that the pump is fully drained of any water and
store it in a warm environment to protect it from frost damage.
SAFETY INSTRUCTIONS….cont
Caution:
anyone who operates this water pump should read and fully un-
derstand all of the instructions and warnings in this manual.
Hot Surfaces:
During normal operation certain parts of this water pump will become
hot.
ALWAYS
stay alert and be aware of hot components / surfaces. Allow the engine
to cool before attempting to move, clean or maintain the water pump.
Poisonous Fumes:
Exhaust fumes produced during normal operation are
poisonous.
Do not
operate this water pump in enclosed areas; always en-
sure adequate ventilation.
Flammable:
The fuel used to run this water pump (unleaded petrol) is highly flam-
mable. Never re-fuel the water pump whilst it is still running. Store unused fuel safely
and away from children and in accordance with local regulations / laws.
CAUTION:
The warnings and cautions mentioned in this user manual can not cover all possible
conditions and situations that may occur. It must be understood by the operator that common
sense and caution are factors which cannot be built into this product, but must be applied.
This water pump can be used to drain rain water, domestic waste water and to re-
move water from flooded rooms in emergency conditions. The pump can be used to
transfer clean or moderately dirty water (no solids).
This pump is designed to be used in the following applications:
Draining of cisterns, rainwater reservoirs, wells, ponds, swimming pools, storm
drains, flooded cellars, boats and yachts.
It is only for use with water and not chemicals or other substances that could
damage the internal seals etc.
The pump cannot be used for flammable, corrosive, explosive or dangerous
liquids.
It should not be used where aquatic life is present such as in domestic, or commercial
ponds, or similar.
SPECIFIED CONDITIONS OF USE
19
PARTS LIST
Ref. No.
Description
SIP Part No.
Ref. No.
Description
SIP Part No.
1.
Engine
PW11-00001
24.
Flange bolt M10x25
PW11-00024
2.
Flange nut M8
PW11-00002
25.
Inlet flange
PW11-00025
3.
Flange bolt M8x34
PW11-00003
26.
Check valve
PW11-00026
4.
Pump cover
PW11-00004
27.
Rubber washer
PW11-00027
5.
Washer M8
PW11-00005
28.
Outlet flange
PW11-00028
6.
Rubber washer
PW11-00006
29.
Flange bolt M8x20
PW11-00029
7.
Inner hex bolt M8x60
PW11-00007
30.
Shock absorber
PW11-00030
8.
Mechanical seal
PW11-00008
31.
Frame
PW11-00031
9.
Porcelain seal
PW11-00009
32.
Shock absorber
PW11-00032
10.
Impeller
PW11-00010
33.
Strainer
PW11-00033
11.
O-ring
PW11-00011
34.
Nut
PW11-00034
12.
Volute casing
PW11-00012
35.
Fuel tank
PW11-00035
13.
Rubber bushing
PW11-00013
36.
Fuel pipe clip
PW11-00036
14.
Pump housing
PW11-00014
37.
Fuel pipe
PW11-00037
15.
Washer M10
PW11-00015
38.
Fuel tank cap
PW11-00039
16.
Spring washer M10
PW11-00016
39.
Fuel tank filter
PW11-00040
17.
Flange bolt M10x30
PW11-00017
40.
Flange bolt
PW11-00041
18.
O-ring
PW11-00018
41.
Pull cord
PW11-00042
19.
Plug
PW11-00019
42.
Air filter
PW11-00043
20.
Hose clamp
PW11-00020
43.
Oil dipstick
PW11-00044
21.
Coupler
PW11-00021
N/A
Spark plug
PW11-00045
22.
Rubber washer
PW11-00022
N/A
Carburettor
PW11-00046
23.
Nut
PW11-00023
