5
SAFETY INSTRUCTIONS
...cont
DANGER! Check that the product is in sound condition and good working order;
Take
immediate action to repair or replace damaged parts.
WARNING!
Only operate on a level and stable surface and never use on soft ground
where the product is likely to “sink” whilst in operation.
NEVER STAND ON THE PRODUCT:
The product is not designed for this purpose.
DO NOT
dismantle or tamper with the product, as this may be dangerous and will
invalidate the warranty.
If a problem with the
product
is experienced or suspected stop using the product
immediately
and contact your distributor for repair.
Do not attempt to
apply
a load that exceeds the rated capacity of the product.
Regularly inspect, clean and lubricate the product, ensuring that it is in good
working order and condition.
Always ensure that the work area is clean and tidy, free from unrelated materials and
has adequate lighting.
Keep hands, limbs etc. clear of moving parts during operation.
Failure to follow the warnings in this manual, may result in personal injury and/
or property damage.
Prior to applying the load, be sure tha
t all chains are secure and connected
correctly
.
Components of this
product
are specially designed to withstand the rated capacity.
Do not substitute bolts, pins, or any other components.
Always
lift
the load
evenly
. Offset loads can
cause
damage
to the product and the
item being lifted.
.
Before operating, check for signs of crack
s
, bent support pins , loose or missing
bolts, or any other structural damage. Do not operate if any of these conditions
exist. Have repairs made only by an authorised service centre / engineer.
Due to various applications, it is your responsibility to always use adequate
protection
, such as eye protection and heavy protective clothing, when operating
this .
Do not stand in front of work area where the load is applied.
Summary of Contents for 03692
Page 2: ......
Page 9: ...9 NOTES...