6
ELECTRICAL CONNECTIONS
SAFETY INSTRUCTIONS
...cont
If the product appears to be damaged in any way, is found to be badly worn, or
operates abnormally
IT SHOULD BE REMOVED FROM SERVICE
until necessary
repairs are made by an authorised service centre.
DO NOT
use the product to compress springs or any other item that could disen-
gage and cause a potential hazard.
Understand the operating environment;
Before each use the operator should as-
sess, understand and where possible reduce the specific risks and dangers associat-
ed with the operating environment. Bystanders should also be made aware of any
risks associated with the operating environment.
CAUTION:
The warnings and cautions mentioned in this user manual can not cover all possible
conditions and situations that may occur. It must be understood by the oper-ator that common
sense and caution are factors which cannot be built into this prod-uct, but must be applied.
Danger:
Never exceed the maximum capacity of 12 ton, overloading can lead
to personal injury or damage to the pipe bender.
This SIP
Pipe Bender
is covered by a 2 year parts and labour warranty covering
failure due to manufacturers defects. This does not cover failure due to misuse or
operating the pipe bender outside the scope of this manual - any claims deemed to
be outside the scope of the warranty may be subject to charges Including, but
not limited to parts, labour and carriage costs.
This guarantee does not cover consumables such as oil, springs, formers etc.
In the unlikely event of warranty claims, contact your distributor as soon as possible.
Note:
Proof of purchase will be required before any warranty can be honoured.
GUARANTEE