1. Placing the eq
1. Placing the eq
1. Placing the eq
1. Placing the equipment
uipment
uipment
uipment
Avoid placing the equipment in areas that limit the air flow from the fan and from the ventilation grids (do not cover
the power source).
Make sure that the environment temperature does not exceed of 40°C (104°F), that there is no wet air c ontaining
dusts, acids, salts, concentrations of ferrous or metallic dust.
Check that the mains voltage is the same as the power source voltage.
Make sure that the power available from the mains is adequate for the power required by the generator (see
technical data).
Make sure that the working conditions conform with the IP protection degree.
Casings ensure protection of the electrical components against external agents and against direct contact. They
have various degrees of protection against solids and water, depending on the conditions they are used in.
The degree of protection is shown by the letters IP followed by two digits: the first digit shows the degree of
protection against solid objects and the second the degree of protection against water.
I
Digit
Description
II
Digit
Description
Additional
field
Description
2
Protected against solid objects larger
than 12 mm (for example: a finger).
1
Protected against drops
of water falling vertically.
S
Equipment
not
in
operation.
2
Protected against solid objects larger
than 12 mm (for example: a finger).
3
Protected against rain
fall with 60° slope.
S
Equipment
not
in
operation.
2. Receipt of materials
2. Receipt of materials
2. Receipt of materials
2. Receipt of materials
The package contains:
•
1 power source;
•
1 user manual;
•
1 belt
•
1 torch;
•
1 earth cable;
•
1 kit of consumables.
Make sure that all the materials listed above are in the package. If anything is missing, contact your dealer.
Make sure that the generator has not been damaged during transport. If damage is found, promptly contact your
dealer.
