Sinterit LISA PRO User Manual | 10
WARNING!
•
Structural damage and improper alterations or repairs could change the protection capacity of
the printer and therefore cancel the guarantee.
•
Any alterations to the appliance can only be made by Sinterit Support.
•
In the event of Customers fitting a tool to the machine not supplied by Sinterit, make sure the
safety conditions required by Machine Directive 2006/42/CE are complied with and in any
event, Sinterit is unable to accept liability for any problems arising from the use of such tool.
STOP!
Avoid using flammable or toxic solvents such as petrol, benzene, ether and alcohol
for cleaning.
G. WORKING WITH POWDERS
WARNING!
•
When working with the polyamide powder or other designated printer powder
for the Sinterit Lisa PRO printer, always wear Personal Protection dedicated
to this device (Protective Glasses, Protective Gloves, Protective Dust Mask).
•
When working with a powder, avoid inhalation or swallowing and contact with
skin and eyes.
ATTENTION!
•
Polyamide powder should be stored in tightly closed containers (e.g Sinterit Metal Container),
in a room at room temperature and low humidity.
•
The powder should be stored out of reach of children and pets.
•
If the device is not used for a long time, the powder should be removed from the printer and
stored in a sealed package (e.g Sinterit Metal Container).
ATTENTION!
When printing the smell of melting material may be emitted in intensities which do not affect the
health of users. However, in the case of long-term operation of the printer in a poorly ventilated
room, the smell may become unpleasant and irritating. Adequate ventilation is recommended in
order to create the best printing conditions.
STOP!
Do not attempt to burn/melt polyamide powder. The resulting sparks and hot mass
can cause severe burns.
Keep the ppowder material away from fire.
STOP!
Do not dispose of in municipal waste! The used powder material should be stored
in sealed containers and disposed of in accordance with local policy of waste
plastic material.
