BPI-D1 User Manual
http://www.banana-pi.com
http://www.sinovoip.com.cn
Relevant Information
WiFi LED at work
D1S "function key" button, click open WiFi AP mode, and then click close.
“Green LED”will flash for about 8 seconds:
LED Status
Description
Light
WiFi work in AP mode, you can search the AP SSID.
( for example, BPI_D1_XXYYZZ )
Flash
WiFi work in slave mode, it will automatically connect the
AP that set the parameters before.
WiFi ON/OFF Energy Consumption
WiFi ON/OFF to save the power consumption, the two statuses generally as
follows:
1. WiFi OFF, D1S is recording and saved to TF card, current 5V power is about
250mA.
2. WiFi ON, D1S is recording and saved to TF card, at the same time D1S
connected to the network through WiFi
，
current 5V power is about 350mA.
3. It can be used to predict 500mah lithium batteries can maintain D1S work 1
to 2 hours.
