1
、
Introduction
HDMI Over Ethernet is based on TCP/IP standard. It transmit your HD display with the
high resolutions up to 395 feet (120 meters) away from your HDMI or DVI-D source by using
one CAT5e/6 cable. With the advantage of TCP/IP standard
，
you can extend your HD video
to multiple displays by using an Ethernet Switch.
2
、
Specifications
Ø
Following TCP/IP standard.
Ø
Support HDMI1.3 protocol.
Ø
HDCP1.1 & 1.2 protocol compliant
Ø
Support point-to-point mode, one point-to-many mode and cascade connection mode.
Ø
Support IR extender function allows IR remote control of Source devices from remote
viewing location by sending IR commands received in the vicinity of the Display back to
the Source devices.
HDTV Resolutions
480p,576p,720p,1080p
Audio
Sample rate
：
32kHz, 44.1kHz and 48kHz
IR remote control
38KHz; NEC
HDMI
HDMI 1.3
HDCP
HDMI 1.2
Power adapter
Input: 100V - 240V (50 - 60Hz) Output: 5V/1A
Power consumption
HDMI Sender: 3W HDMI Receiver: 3W
Size(L-W-H)
100
×
60
×
25mm
Weight
70g
Operating Temperature/Humidity
0
℃
- 70
℃
/ 10% - 80%RH(no condensation)
Storage Temperature/Humidity
-10
℃
- 80
℃
/ 5% -90% RH(no condensation)
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1) Main unit No. 1 Sender , Main unit No. 2 Receiver
2) Two pieces of 5V DC Power Supply.
3) a pieces of IR transmitter and a pieces of IR receiver
4) User
’
s Manual
