![Sinotrack ST-908 User Manual Download Page 10](http://html1.mh-extra.com/html/sinotrack/st-908/st-908_user-manual_1283213010.webp)
10
12
Control the output
A******,
007
,P,F
007: command code
******: password, default 000000
P: the position of the output
P =1 output 1
P =2 output 2
F: the control signal
F =1 give the relay the current to drive it (cut
off the car power).
F =0 cut off the current of the relay
(comeback the normal).
13
Time zone setting
A******,
008
,+08
008: command code
******: password, default 000000
+8: Set the local time zone, the default value
is +8
14
Inquire the system
parameter.
Including the software
version, password,
interval, speed limit,
area limit, I/O state,
GPS state, SOS
number, control number,
etc
A******,
009
009: command code
******: password, default 000000
15
GPRS switch
A******,
010
,X
010: command code
******: password, default 000000
X: GPRS function
=0 GPRS OFF
=1 GPRS UDP
=2 GPRS TCP
16
SET APN
A******,
011
,APN,
username,password
011: command code
******: password, default 000000
APN: GPRS use this gateway to connect
internet.
Username: APN Username
Password: APN Password
The default APN is CMNET
17
Set the center IP and
A******,
012
,IP:Port
012: command code