4. The setting mode will return to time display mode if there is no operation for 15 seconds.
Alarm Setting
There are 3 alarm time settings so you can store 3 different alarm times in the memory.
1. Under the Alarm Mode A1, press the UP button to turn the alarm on, press again to turn off.
2. When A1 is activated,
‘oN A1’ will appear on the display briefly then it will continue to display the alarm time.
3. Press the SET button for 2 seconds, the display will flash so you can set the alarm time.
4. Press the UP/DOWN buttons to adjust the alarm time. Press and hold the UP/DOWN button to speed up the
scanning of the digits.
5. When the Alarm is activated, the Alarm Symbol will be displayed on the screen.
6. The setting mode will exit if there is no operation for 15 seconds.
*A2 and A3 alarm can be set in the same way as A1.
*Alarm will ring for 1 minute at the set time, press any button to stop the alarm. Please note the alarm symbol will
stay on the display and will ring the next day at the same time unless deactivated in the alarm settings.
Temperature Display
*After switching it on, the clock will automatically detect the current room temperature and update the temperature
every 60 seconds.
*Press the DOWN button for 2 seconds to switch between Celsius(
℃
)/Fahrenheit(
℉
).
Other Functions
Display Modes
Under clock, calendar or temperature mode, press the UP button to switch between Dp-1,Dp-2 and dP-3 display
modes.
dp-1 mode: LED alternately displays time, date and temperature. Time will display for 10 seconds, date and
temperature will display for 2 seconds each.
For example: press the UP button to enter the dp-1 Mode, after setting it return back to time display.
A. Under display mode, the LED display will alternate in the following sequence :
--> time(10 seconds) --> date(2 seconds) --> temperature(2 seconds)
B. Under power saving, press the control mode, the LED display will turn off after 10 seconds, make a loud noise
or clap to turn the LED display on again in order to return to time display.
dp-2 mode: Set your desired mode and then keep it as display mode.
For example: press the UP button to enter to the dp-2 mode, after setting it return back to time display.
A. Press the SET button to enter the date display, and keep the display.
B. Then press the SET button to enter the alarm display, and keep the display.
C. Then press the SET button to enter the temperature display, and keep the display.
D. Under power saving, press the control mode, the LED display will turn off after 10 seconds, make a loud noise
or clap to turn the LED display on again and keep the desired mode before LED turns off.
dp-3 mode: Default clock display, set your desired value
and quit or it will return back to display the time after 15
seconds if no action.
For example: press the UP button to enter the dp-3 mode, after setting it return back to time display.
A. Press the SET button to enter the date display, after 10 seconds return back and keep as time display.
B. Then press the SET button to enter the alarm display, after 10 seconds return back and keep as time display.
C. Then press the SET button to enter the temperature display, after 10 seconds return back and keep as time
display.
D. Under power saving, press the control mode, the LED display will turn off after 10 seconds, make a loud noise
or clap to turn the LED display on again to show time display.