Audio operation & USB operation
You can connect the unit with Disc player/MP3 player/smart phone or other music device
via an audio cable or optical fiber cable.
Audio
1. Connect one end of 3.5mm audio cable to the Mp3 player’s line output/headphone and
the other end to the
AUX IN
socket on the rear panel of the unit (cable not supplied).
2. Press the
SOURCE
button or
AUX
button on remote control to enter the audio mode.
3. Control the playback only by your Mp3 player.
Coaxial 1/ Coaxial 2
1. Connect the Disc player using a lotus audio cable to
COAXIAL 1
/
COAXIAL 2
sockets.
2. Press the
SOURCE
button or
COAX 1 or COAX 2
button on remote control to enter the
COAXIAL 1 or COAXIAL 2.
Optical fiber
1. Use an optical fiber to connect the speaker with Disc player via
OPTICAL
socket.
2. Press the
SOURCE
button or press
OPT
button on remote control to enter optical mode.
Control the playback only by your Disc player/MP3 player, etc.
USB operation
1. Insert the USB stick into the USB port on the rear panel of the unit.
2. Press the
SOURCE
button or
USB
button on remote control to enter the USB mode.
3. Once the USB stick inserted, the unit will auto-detect the files and start playing.
4. Please refer to
GENERAL OPERATION
for playback control.
5. The USB port charges the device inserted to the USB port.
NOTE:
1. Depending on the amount of data and media speed, it may take longer time to read the
files stored in the USB device, this is not a malfunction.
2. The supported files format is MP3 with an extended name “.mp3".
3. For some music files, even though they are of the support format, the unit may not play
because of the format compatibility.
9
Summary of Contents for BTS-800
Page 1: ...User Manual Hi Fi Tower Speaker BTS 800...
Page 12: ......
