Out
TH1123WF
TH1124WF
Installation Guide
Smart Thermostat for
Electric Heating
Wi-Fi connection status
Time
Secondary display:
Setpoint [Set) or outside
temperature [Out]
Ambient temperature
Heating indicator
Make sure that the
breakers for your
heating system are
off at the main
electrical panel.
Use the connectors provided to connect the thermostat wires
to the wires in the electrical box.
Note:
The wires of this thermostat are non-polarized.
Replace the cover
and lock
Power up the thermostat.
Unlock and lift the
thermostat cover.
INSTALL YOUR THERMOSTAT
1
2
3
4
5
Out
YOUR TH1123WF / TH1124WF THERMOSTAT
Operatlng voltage:
120 / 208 / 240 Vac, 60 Hz
• TH1123WF Thermostat
Maximum load:
12.5 A / 3000 W @ 240 Vac
Resistive load only.
Minimum load:
1.25 A / 300 W @ 240 Vac
• TH1124WF Thermostat
Maximum load:
16.7 A / 4000 w @ 240 Vac
Resistive load only.
Minimum load:
1.25 A / 300 W @ 240 Vac
Setpoint range:
5 ˚C to 30 ˚C (41 ˚F to 86 ˚F)
Display range:
0 ˚C to 50 ˚C (32 ˚F to 99 ˚F)
Resolution:
±
0.5 ˚C (
±
1 ˚F)
Storage:
-20 ˚C to 50 ˚C (-4 ˚F to 122 ˚F)
Operation:
0 ˚C to 50 ˚C (32 ˚F to 122 ˚F)
Protocole :
Wi-Fi
Standard:
IEEE 802.11 b/g/n
Frequency:
2.4 GHz
Compatible with an electric heating system such as:
• Baseboard heater [short cycle]
• Convector [short cycle]
• Fan-forced convector [long cycle)
• Radiant ceiling heating
Controlling this HomeKit-enabled accessory automatically and
away from home requires a HomePod, Apple TV, or iPad set up
as a home hub. It is recommended that you update to the latest
software and operating system.
TECHNICAL SPECIFICATIONS
Make sure to firmly tighten the wire
connectors for a secure connection.
A loose connection can be a tire hazard.
Special CO/ ALR solderless connectors
must be used when connecting with
aluminum conductors.
Four-wire installation
Two-wire installation
The installation of this thermostat should be made by a certified electrician and must be installed in
conformity with the national and local Electrical Codes.
Warnings
