6. Search for Ethernet devices:
Used to search Ethernet type devices
7. Search for serial devices:
Used to search serial port devices
8. Listening settings:
Used to connect the device in client mode to the software tool.
9. Search:
Used to search for Ethernet and serial type devices.
10. Devices List:
Display all searched devices.
11. Device Information:
Display name, IP address, point value, etc. of the device, and you can modify the
point value of the device.
12. Refresh:
Used to refresh the point value of the device after it changes.
Select
Search for Ethernet devices
, and then click
Search
, the search results are as follows.
Parameters Settings
Double-click the searched device or click the
Set
to pop up the dialog box to configure the basic parameters of
the device (default IP address 10.1.1.10/subnet mask 255.0.0.0/gateway 10.1.1.200), the device parameters are
described below:
C2000-A1-SDD1010-AB3 User Manual
17 / 34
SinoCon Co., Ltd.
www.sinoconsys.com
