SinoCastel IDD-213W, User Manual, Page: 15 / 25

IDD-213W User Manual
14
Some heavy duties may need 9-Pin or 6-Pin deutsch wiring harness.
For vehicles do not have an OBD port, please use power cable to connect vehicle
battery and configure the device with tracker mode.
Start engine, then device starts OBD communication, acquiring GPS info and Cellular
network connection. Various status can be indicated by lights and beeps.
O OB BD D cco om mm mu un niicca attiio on n: The OBD light change its status to solid on and comes 2 beeps
with successful OBD communication.
G GP PS S ffu un nccttiio on n: The GPS light becomes blinking indicates that device has got its
location.
C Ce ellllu ulla arr cco on nn ne eccttiio on n: The Cellular light change its status to slow blinking indicates
registered network, becomes solid on and comes 3 beeps indicate logged into the
server.
N No otte e:
When device is the first time power on (plugged in), it will scan OBD protocol according to
pre-configured working mode (ie, passenger car or heavy duty mode), the maximum scanning
time can be up to 10 minutes, if no OBD protocol is detected during this period, device will auto
change working mode to tracker mode, if OBD protocol is detected, device will keep its working