ASSEMBLY INSTRUCTION FOR THE DIVING STRAP SYSTEM
Practical during dives – versatile during everyday use.
Our DuoFlex offers you a high level of flexibility.
With the
quick-adjustment strap system
you can easily swap a silicone strap
for another one. For example, if you are wearing a wetsuit while diving and you
need a longer silicone strap. But thanks to the quick-adjustment strap system,
you can also easily switch from a red silicone strap to a black one. With the
folding clasp’s
strap-length quick adjustment,
you can adjust the length of your
silicone strap to your desired wearing comfort.
We explain below the individual steps for the fitting and using DuoFlex. Please first
read this introduction fully before carrying out the individual steps.
If you are not sure about fitting and using DuoFlex, please contact your
specialist SINN retailer directly or one of our watchmakers in customer service
in Frankfurt am Main. We will also be pleased to advise you by telephone.
CONTENT OF THE KIT
The DuoFlex kit consists of the following components:
• Both halves of the silicone strap with pre-installed case adapters
• The folding clasp with strap-length quick adjustment
• A spring bar box with different spring bars and a stud
• A band replacement tool
The kit also includes a practical storage pouch in which you can store your
replacement strap and other accessories. The black pouch provides safe
protection from spray water, dirt and sand. The pouch is fitted with a rolling
closing mechanism and a plug cap.
