SINJI SMART AIR PURIFIER UV, User Manual

Page: 8 / 95

8
Speed
Wind speed; wind speed is divided into three speeds. There is a corresponding
wind speed icon on the control panel.
Anion
In the power-on state, soft touch the “Anion” key and the on-screen “Anion” light
will flicker. Flickering key means it is active.
Child lock
In the power-on state, touch “Child lock” for 3 seconds to activate. Touch it again
for 3 seconds to Unlock.
UV
In the power-on state, touch “UV” to activate and its light will flicker. Touching it
again will turn it off.
Reset
If it works more than 4000 hours, the “Filter” light will flicker as a reminder to
replace a new filter. After installing a new filter, press the “Reset” kig for 5 seconds.
Then the flickering “Filter” light will be dissapear.
Filter installation sequence:
1. Pre-filter
2. HEPA, Carbon
Replacement procedures:
1. Open the front cover
2. Take out of the old filters
3. Install the new Filters in sequence
4. Press the speed timer.
5. Close the upper cover to complete the replacement