Setting up your Mesh Extenders
(You do not currently have any Mesh Extender installed.)
Optimal Placement
How to Configure
your Wi-Fi settings:
Troubleshooting Steps if you encounter
connectivity issues
LED Indicator
1.
Connect the LAN 1 port on the ONR to any LAN port
at the back of a unit of Mesh Extender with the
Ethernet Cable.
2.
Connect the first unit to a power point with the adapter
provided and switch on. Depress the power button on
the back of the device if the device does not turn on.
3.
Place the second unit of the Mesh Extender close to the
first Mesh Extender. Connect the second unit to a power
point with the adapter and switch on.
Depress the power button on the back of the device if
the device does not turn on.
4.
The Mesh LED lights on the second unit will start
flashing white. Once they turn a solid white, you're set!
5.
Re-position the second unit to a location in-between
your Mesh Router/Extender and the area in your home
with weak Wi-Fi signal and switch on.
6.
Connect your Computer or mobile device to the Mesh
Extender via WiFi using the Username and Password
printed on the device label or use the ethernet cable
to connect your computer to the Mesh Extender's
LAN port.
Setting up your Mesh Extenders
(You already have a Wi-Fi 6 Mesh Extender installed.)
1.
Connect both Mesh Extender units to a power point
close to the installed Mesh and switch on. Depress the
power button on the back of the device if it does not
turn on.
2.
Press and hold the WPS button at the front of your
installed Mesh for 2 seconds, then press and hold the
WPS button on one of the Mesh Extender and wait
30–40 seconds for the Mesh LED to turn solid white on
both Mesh Extenders.
3.
Repeat step 2 with the second Mesh extender.
4.
Re-position the 2 Mesh Extenders to a location
in-between your original Router/ Mesh Extender and the
area in your home with weak WiFi signal and switch on.
For optimal connection to eliminate WiFi deadspots,
the placement of each Mesh Extender device should be
within line of sight of the next closest device.
1.
Turn off and turn on your Wi-Fi on your handphone
or device to reset the Wi-Fi connection.
2.
If issue persists, reboot the router.
Scan here for
detailed instructions.
Mesh
Extender
LED
Power
White ON
Pink Flashing
Off
White ON
Off
White ON
Red ON
Red Flash Slowly
White Flash
Moderately
White Flash Slowly
White Flash Quickly
Device is receiving power
FW is being upgraded
Power off
Ethernet connection has been established
No LAN connection on the port
Good signal strength in wireless mesh network
or device be connected to Router by
Ethernet cable
Weak signal strength in wireless mesh network
No mesh connectivity or WPS failure
Mesh is pairing
WPS start
WPS success
LAN (1–2)
Mesh
LED behaviour
Device status
Router
Mesh
Extender
