Singer Smart Out SDHM-10-18DI, Instruction Manual

Page: 6 / 48

6
ENGLISH
SERVICE & REPAIR
1. For service or repair under warranty, please contact the authorized service
company that is mentioned on the guarantee card that accompanies the
product.
2. Do not operate any product with a damaged cord or plug. If the supply cord
is damaged, return the appliance to a SINGER service center for examina-
tion repair or adjustment. Do not attempt to dismantle any part of the appli-
ance. This should only be done at an authorized SINGER service centre.
3. The partial or total non-respect of the safety instructions in the present
instruction manual will automatically release Singer of any type of respon-
sibility in case of malfunction of the machine or injuries to persons or ani-
mals.
4. In case of manipulation, repairing or any modi fi cation of the machine made
by unquali fi ed persons or in case of improper use, the guarantee will be
automatically cancelled.
COMMON QUESTIONS
Q: Why the dehumidi fi er doesn’t work or stop working suddenly?
• Please check if the water tank is full or not well-installed. If yes, pour away
the water and install the water tank in the correct way.
• Please check if the ambient temperature is very low or very high (when
operation temperature is lower than 5 ℃ or higher than 32 ℃ , the unit will not
work).
The operation temperature for the unit must range between 5-32 ℃ and relative
humidity between 30%-80%. Best operation temperature range is 16-32 ℃ .
Q: Why the outlet air is a little warm?
It is not a defect. When room air is condensed by the condensing system,
the water comes out and falls to the tank, the dry air
fl ows through the inner
system but becomes warm.