Singer SISIL SL-RFA75, User Manual, Page: 28 / 38

28
operations
speCial features
DELAY TIME PROGRAM
Preset time means the beginning time of washing.
1. Switch on the power, press "Power" button.
2. Open the tap and lay down the drain hose.
3. Put in the washing and detergent.
4. Select the proper water level according to the quantity of clothes.
5. Select the functions and programs.
6. Press the "Preset" button to select the beginning time of washing.
7. Press the "Start/Pause" button and close the lid.
Confirmation of the preset and inspection
After the preset is started, the corresponding light will be turned on, and other lights are turned off. After
the preset is started, press the surplus preset time, loosen the button and the program will automatically
come back to the preset status.
Cancel the preset, or alternate the preset time
Before the program is started, the preset indicator lights, the preset time is selected from 1 to 24 hours.
After the preset time is set over 24 hours, the preset indicator is turned off and the function will be
cancelled. Press the power switch to end the program, and to cancel the preset function at the same time.
To change the preset time, please press "Start/Pause", and then press the "Preset" button to re-preset.
note: The degree of incoming water pressure may affect the ending time of
washing. By pressing the "Preset" button continuously, you may inspect the
program set.
Function of automatic power shut off
1. If the machine does not start to work within 10 minutes after power on, it will power off automatically.
2. After the end of operation and the buzzer sounding 6 times, it will power off automatically.
Automatic power shut off function to adjust for imbalance
1. If the laundry is placed unevenly before spinning, it is likely to cause vibration during spinning. The
washing machine has a function for adjusting imbalance. When working, the washing machine always
inspects the operation state automatically. If the spinning vibration is too great, the washing machine
automatically starts the adjusting program to balance.
2. When the machine adjusts imbalance, the rinse light will flash, and the machine will start to inject water
to the set water level. The machine adjusts imbalance automatically for about 1 minute, then drains
water and returns to the original spinning state. The washing machine can adjust the imbalance twice.
The alarm will be on, if the imbalance cannot be adjusted.