7
ENGLISH
This function provides extra amount of steam to remove wrinkles on delicate garments in
hanging position, hanging curtains, or other hanging fabrics.
1. Fill the iron as described in the section of How to Fill Water.
2. Connect the iron with a suitable mains supply outlet, pilot light will glow for a second then
goes off.
3. Turn the Temperature Dial to ••• (3-dot)’ or ‘MAX’ position.
4. Pilot light will glow to indicate that the iron is heating up.
5. Pilot light goes off when the required temperature is reached.
6. The iron is now ready for use.
7. Hold the iron between 15 to 30 centimeters away from the garment.
8. Press the Burst of steam button.
9. Steam will penetrate into the garment to remove the wrinkles.
10. Wait for few seconds before pressing the Burst of Steam Button again.
Note:
It may be necessary to press the burst of steam button few times to start this function.
For optimum steam quality, do not operate the Burst of steam more than three times in suc-
cession.
SELF-CLEANING
This function removes the scales and minerals built up in the steam chamber. The iron will re-
main in the best condition if this function is performed at least once a month or more regularly
depending on the hardness of the water used.
1. Fill the iron as described in the section of How to Fill Water, Fill the water tank up to half.
2. Set the Steam control knob to .
2. Place the iron on a surface in upright standing position.
3. Connect the iron to mains supply outlet, pilot light will glow for a second then goes off.
4. Turn the Temperature Dial in clockwise direction to ‘MAX’ position.
5. Pilot light will glow to indicate the iron is heating up.
6. Pilot light will go off when the required temperature is reached.
7. Wait for one more cycle; pilot light glows and goes off.
8. Turn the Temperature Dial in anti-clockwise direction to ‘MIN’.
9. Disconnect the iron from mains supply outlet.
10. Hold the iron horizontally over a sink.Fig.5
11. Press and hold the Self-Cleaning button.
12. Steam and boiling hot water will emit from the holes on the sole plate which contains
scales and minerals that deposited in steam chamber from previous uses.
13. Gently move the iron back and forth until the water tank is empty.
14. When Self-Cleaning is completed, release the Self-Cleaning button.
15. Rest your steam iron back on its heel rest and allow to fully cool down.
16. Wipe the soleplate with a cold damp cloth.
Caution:
Keep skin/body away from the hot water.
Summary of Contents for SG2740
