Singer SF40TIMER, Instruction Manual, Page: 5 / 16

5
ENGLISH
ASSEMBLY INSTRUCTIONS
1. Carefully unpack all parts from the box.
2. Cross two cross base.
3. Take off the screw “C” from poly bag shrink with the compensation tube and
fi x stand pipe with
4 screw “C”
4. Put the base cover over down to the bottom of stand pipe.
5. Place the rear’s grill in front of motor and fasten it with nut.
6. Install blade into shaft and fasten it with blade spinner
7. Mount the front grill onto the rear grill with clips. Make sure that the two halves of the grill are
even. Lock with the screw “B” through the small hole on the front grill, so that both grills are fi
rmly together.
OPERATING INSTRUCTIONS
Make sure that the fan is in a fi rm, level surface.
• Plug the cord into a standard 220 Volt AC outlet.
• The speed of the fan can be selected by pushing the speed control knob at the switch box.
“0” – to turn off all power to the fan.
“1” – for gentle, quiet operation.
“2” – for normal air movement.
“3” – for maximum air movement
• The oscillation mechanism can be activated by pushing the knob downward and the fan can be
made to operate in a stationary position by gently pulling up on the knob.
• Turn the timer clockwise to operate 0 – 120 minutes.
CARE, CLEANING & STORAGE
The fan blade and grill set should be cleaned regularly for most ef fi cient operation.
• Before cleaning, be sure to turn off and unplug the unit.
• Reverse the assembly procedure to remove those parts from the motor assembly. Wipe with a
damp cloth and then with a dry towel.
Important notes:
• Never immerse any fan components in water. Wipe the fan only with a dry or slightly moist cloth
and then with a dry towel.
• Never use gasoline, benzene or thinner. This will damage the surface of the unit.
• Always store the fan in a cool dry location.
SERVICE & REPAIR
For service or repair under warranty, please contact the authorized service company that is
mentioned on the guarantee card that accompanies the product.
Do not operate any product with a damaged cord or plug. If the supply cord is damaged, return
the appliance to a SINGER service center for examination repair or adjustment. Do not attempt to
dismantle any part of the fan. This should only be done at an authorized SINGER service centre.