Table of Contents
Previous Page | Next Page
Sewing Machine No. 15
22
ADJUSTABLE HEMMER - Hemming
Remove the presser foot and attach the adjustable hemmer in its place as shown in Fig. 22.
This hemmer will turn hems from 3/16 inch to 1 in. wide. The adjustment is made by
loosening the thumb screw on the hemmer and moving the slide to the right or left until the
hem turned is of the desired width. Enter the edge of the cloth into the hemmer under the
scale and draw it back and forth until the hem is formed, stopping with the end under the
needle. Lower the presser bar and commence to sew being careful to so guide cloth as to
keep hemmer full. Felling can also be done with the adjustable hemmer by following
instructions on pages 19 and 20.
FIG. 22
