Singer Sani Steam Care SGR-20430, Instruction Manual

Page: 11 / 32

11
ENGLISH
2. If the cloth is synthetic, it may melt due to the high temperature on the
soleplate. Switch the steam off and rub off any residue immediately with a
thickly folded, damp cotton cloth.
3. To keep the soleplate smooth, you should avoid contact with hard metal
objects. Never use a scouring pad, or chemicals to clean the soleplate.
STORING THE APPLIANCE
1. Unplug the appliance and let it cool down. Empty the water tank (10).
2. Place the iron on the steam station, standing on the pad (13). If your steam
station is equipped with iron lock system (14*), fi x the iron to it. First insert
the heel and then block the tip moving the lock system against the iron.
3. Store the steam hose (6) and the mains cable (7) on the storage holder (8).
TROUBLE SHOOTING
Problem Possible causes Solution
The iron begins to
smoke when switched
on. 1. During fi rst use: cer-
tain components on the
appliance have been
lightly greased at the
factory and may pro-
duce a small amount
of smoke when initially
heated.
2. During subsequent
use: the soleplate may
be soiled.
1. This is completely
normal and will stop af-
ter a short while.
2. Clean the soleplate
according to the clean-
ing instructions in this
manual.
Water fl ows through the
holes on the soleplate.
The water is condens-
ing inside the tubes be-
cause steam is being
used for the
fi rst time or
has not been used for a
long time.
Point the iron away from
the ironing area and
press the steam release
button until steam is
produced.