Singer Mega Dry SDHM-25L-50DI, Instruction Manual

Page: 9 / 48

9
ENGLISH
OPERATING METHODS
Description of functions
Timer off
When the dehumidi fi er is on, press the Timer key to adjust time from 1h to
24h. By pressing this key once, you increase the set time by 1h. After the
set time exceeds 24h, the
fi gure returns to 1 again. If you press the Timer
key continuously, the time increases and changes circularly. When the set
time expires, the dehumidi
fi er turns off automatically. After you have entered
your setting and if the Timer key does not act at all within 5s, the set time is
con
fi rmed. During this function, the indicator light of the Timer key is on until
the set time is over.
Timer on
When the dehumidi fi er is on standby, the method for adjusting the set time by
using the Timer key is the same as the one used in timer off. After you have
entered your setting and if the Timer key does not act at all within 5s, the set
time is con
fi rmed. In timer on state, the indicator light on the Timer key is
normally on and the set time is displayed on the control panel.
AUTO mode
In this mode, if the room humidity is higher than the set humidity or between
±5% of the set humidity, the compressor will start and the fan will run at the
set speed. If the room humidity is lower than the set humidity by -5%, then
the compressor will stop but the fan will run at the set speed. The default set
humidity value is 50%.
CONTINUOUS mode
During this mode, no matter how much the relative humidity in the room is, the
compressor will start, the fan will run at high speed by default and the air speed
can be regulated via the air speed key.
INSIDE DRYING function
Press the Drying key in the dehumidi fi er for over 2s to start the drying function
in the dehumidi fi er. The whole drying procedure needs approximately 1h.