Singer BX-30T, Instruction Manual, Page: 5 / 16

5
ENGLISH
Timer knob
120 MINUTES TIMER
1. Rotate the timer knob to point “ON” and then rotate the
speed switch adjusting the speed (1,2,3). The fan will run
without timer limit.
2. If you rotate the timer knob clockwise to point at any position
among “20...120” the fan will run according to your setting
time. When time set is over, the knob will turn back to “OFF”
position and fan stops running automatically.
3. If timer knob is at the ‘‘OFF’’ position the fan will not oper-
ate even if you turn the speed switch on. So, keep the timer
knob at ‘‘ON’’ position.
CLEANING AND MAINTENANCE
IMPORTANT NOTICE: ALWAYS SWITCH OFF AND DISCONNECT THE FAN FROM THE
MAIN SUPPLY BEFORE CLEANING.
1. Clean the outside of the fan by wiping with a damp cloth and buff with a dry cloth. Don’t wipe
the surface with a hard cloth; don’t use alcohol or hard detergent to clean the fan in order to
prevent the fan from changing color or corrosion.
2. To clean the rear grill and blade follow the same cleaning method as described above.
3. When maintaining the fan, never impact and press blade and louver forcibly to avoid dam-
age.
4. Do not rotate the air guide louver forcibly
5. When the fan is not used for long time periods, it should be protected from dust and stored
in a clean and dry place.
6. Lubricant application: Before using the unit each year, please apply a little high quality lubri-
cant along the motor shaft
SERVICE & REPAIR
1. For service or repair under warranty, please contact the authorized service company that is
mentioned on the guarantee card that accompanies the product.
2. Do not operate any product with a damaged cord or plug. If the supply cord is damaged, re-
turn the appliance to a SINGER service center for examination repair or adjustment. Do not
attempt to dismantle any part of the fan. This should only be done at an authorized SINGER
service centre.