GB
GB
Monogramming with embroidery hoop*
Drop the feed dogs. (Note: Stitch length cannot be controlled
with dial)
-Set the machine as illustrated above.
-Remove the presser foot and the presser foot holder.
-Lower presser foot lever before starting to sew.
-Adjust the stitch width according to the size of lettering or
design.
-Draw the desired lettering or design on the right side of the
fabric.
-Stretch the fabric between embroidery hoop as firmly as possible.
-Place the fabric under the needle. Make sure the presser foot
bar is down in its lowest position.
-Turn the balance wheel towards you to bring up the lower
thread through the fabric. Sew a few securing stitches at the
starting point.
-Hold the hoop with thumb and forefingers of both hands.
-Coordinate sewing speed and movement of hoop.
* Embroidery hoop not included with machine.
Preparation for Monogramming
74
a b
a
b
Meijer.com
All manuals and user guides at all-guides.com
all-guides.com
