Singer 2700 Series, Service Manual, Page: 31 / 67

Removal:
Replacement:
Desassembly sequence:
Assembly sequence:
1. Remove the face plate, the free-arm extension table, the arm top cover, and the
covers.
2. Turn handwheel (D) making screw (B) to come to sight.
3. Loose screw (B) just enough to clear it out from the hole in armshaft (A).
4. Remove handwheel (D) while sliding motor belt (C) to the left.
1. Replace these parts the same way as described above, but in a reverse order. Make
sure screw (B) is properly located in the hole of armshaft (A).
1. Remove handwheel bushing set screw (B).
2. Remove retaining ring (H).
3. Remove clutch/declutch assembly (G).
4. Draw the pin ( I ) out and remove plate cover (F).
1. Replace plate (F) by inserting pin ( I ) on clutch/declutch assembly (G).
2. Insert handwheel on clutch/declutch assembly.
3. Replace retaining ring (H).
4. Replace handwheel bushing set screw (B).
Handwheel Disassembly
Handwheel
Service Manual
30
AGO/03
Rev. n .
o
359109-000 AGO/03