TROUBLE SHOOTING GUIDE
No Output
Is the inverter’s cable firmly connected to the battery?
At times the connections of your DC cables can come loose.
Check each connection on both the inverter and battery and
ensure they are secure.
It is possible that your inverter has been connected to the
battery incorrectly – reverse polarity – thus damaging the
inverter. Damage caused by reverse polarity is not covered by
warranty. Please contact your local Sinergex dealer.
Alarm Operates Continuously
Has one of the inverter’s protection features activated?
Your inverter is fitted with a variety of protection features:
Overload – remove the load (if alarm turns off, it’s likely that
the unit was overloaded).
Overheat – if the unit is warm/hot to touch and was
functioning normally, it’s likely that the overheat protection
has activated.
(CONT’D)
Sinergex Pure Watts 500 Elite Manual
14