CAUTION:
Do not connect your 12V Sinergex 300 Elite to
24V systems, damage will result and void warranty.
Overheat Protection
Inverters heat up during operation – this is normal. However,
if the unit’s internal temperature reaches excessive levels, a
protection system shuts the unit down. Once it cools to within
operating limits it will restart.
If using the inverter in hotter climates, keep it out of direct
sunlight and do not cover – otherwise internal heat levels will
rise – triggering the overheat protection.
Soft Start
Upon switching on, the Sinergex PureWatts Elite 300 will
gradually ramp up power over a few seconds – this allows the
unit to cope with heavier than normal loads that wouldn’t
normally be started by a small inverter.
Sinergex Pure Watts 300 Elite Manual
12