13
/
16
Timer
It’s disabled by default. Short pressing will adjust the timer range from
30Min-1H-2H-3H-4H-5H-6H-7H-8H-30Min. The symbol light is on by
default.
This button no function
Day timer
There is a timing function. When turning on the fireplace, the timer icon
light will be on. The clock will show 00:00. The week icon light will be on
and show SUN.
When the timer is needed after turning on, press “DAY” button on remote
control. Each time you press the button, the week icon light will be on
from left to right to set the time to the current date.
Hour timer
Each time you press the “HOUR” button, the time is increased by one hour.
Set the time to the current hour, hour timer scope is: 00-23.
Minutes timer
Each time you press the “MIN” button, the time is increased by one
minute. Set the time to the current minutes, minutes timer scope is: 00-59.
When it is not unplugged or disconnected, the on-off time will have
memory function, which will not be reset. If unusual timer id discovered,
the batteries powering the mainboard may be dead. Please replace the
batteries quickly. (Battery Model: CR1220-3V), (Each time you press the
button, the buzzer will make a short sound.)