Sindoh D310 Series, User Manual, Page: 43 / 324

4.3 Setting the date and time for the machine 4
[Web Management Tool] 4-4
4.3 Setting the date and time for the machine
Manually configuring settings
Manually specify the current date and time of this machine.
In the administrator mode, select [Maintenance] - [Date/Time Setting] - [Manual Setting], then configure the
following settings.
Automatically configuring settings using NTP
Using the NTP (Network Time Protocol) server allows you to automatically adjust the date and time of this
machine.
Register the NTP server used. To periodically adjust the date and time by connecting to the NTP server, spec-
ify an interval for adjusting the date and time.
0 To adjust the date and time using the NTP server, you must connect this machine to the network.
1
In the administrator mode, select [Maintenance] - [Date/Time Setting] - [Manual Setting], then configure
the [Time Zone] setting.
%
For details on how to configure [Time Zone] setting, refer to page 4-4.
2
In the administrator mode, select [Maintenance] - [Date/Time Setting] - [Time Adjustment Setting], then
configure the following settings.
3
Click [Adjust].
Connect to the NTP server, and adjust the date and time of this machine.
Settings Description
[Date] Specify the current date of this machine.
•
[Year]: Enter the current year.
• [Month]: Enter the current month.
• [Day]: Enter the current day.
[Time] Specify the current time of this machine.
•
[Hour]: Enter the current hour.
• [Minute]: Enter the current minute.
• [Time Zone]: Select a time zone (time difference from the world standard
time) to suit your environment.
Settings Description
[Time Adjustment Set-
ting] To automatically adjust the date and time of this machine via the NTP server,
select [ON].
[OFF] is specified by default.
[Auto IPv6 Retrieval] Select [ON] to automatically specify the NTP server address.
In the IPv6 environment, the NTP server address can be automatically speci-
fied by DHCPv6.
[ON] is specified by default.
[NTP Server Address] Enter the NTP server address.
Use one of the following formats.
•
Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[Port No.] If necessary, change the NTP server port number.
In normal circumstances, you can use the original port number.
[123] is specified by default.
[Auto Time Adjustment] To periodically adjust the date and time by connecting to the NTP server, se-
lect [ON]. Also, specify an interval for adjusting the date and time at [Polling In-
terval].
[OFF] is specified by default.
[Polling Interval] If you select [ON] for [Auto Time Adjustment], specify an interval to automati-
cally adjust the date and time of this machine (unit: hours).