Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-
01
8
Insert the water spout into the water inlet on the back ofthe device, add about 3L
of deionized water or pure water to the device through the funnel, prohibit the use of
tap water or mineral water, and then turn on the device for about 3 minutes to
eliminate the air contained in the water circulation. After running for 5 minutes, turn
offthe power, and then fill the water to the maximum level ofthe water tank. (The
cooling water must be changed once a month)
Note:
The
first
time
after
changing
the
cooling
water
each
time,
turn
on
the
device
for
3
minutes
to
observe
whether
the
waterway
is
OK
.
3.2.2 Drainage
Take out the drain plug on the back of device and insert the water spout into the
drain outlet. The water in the tank will be automatically discharged under the action of
gravity until emptying.
Note:
After
emptying,
there
will
be
a
small
amount
of
circulating
water
remaining
in
the
water
tank
and
the
temperature
should
not
be
below
0
in
storage.
Summary of Contents for Monaliza M4C-II
Page 19: ......
