MATERIAL CHECK LIST
SUPPLIED
ITEM
PART NO.
DESCRIPTION
QTY. SINGLE QTY. DUAL
1
TO SUIT ANTENNA ASSEMBLY AND CONNECTOR
1
2
2
6009263 #8-32 x ½ SK HD, SS
4
8
3
6010210 #8 LOCK-WASHER, EXT-TOOTH
4
8
4
8003384 TIE WRAP
10
20
5
8016647 TUNNING TOOL
1
1
6
6001484 8-18 x 5/8” SQ. SK. PAN HD ZINC
6
12
7
TO SUIT POWER DIVIDER
-
1
NOT SUPPLIED
ITEM
DESCRIPTION
1
2” WIDE “Gorilla Tape®” OR RQUIVALENT
2
CORDLESS DRILL WITH NO. 2 SQUARE HEAD BIT
3
CONNECTOR CRIMPER AND TRIMING TOOLS
4
VNA ANALYZER WITH APPROPRIATE CONNECTOR ADAPTER
NOTE: Every vehicle is different in style. The following guide is for installation in
most common vehicles.
STEP 1:
ASSIGNING ANTENNA LOCATION
NOTE: Using an automotive hoist is recommended for an easier access and safety.
STEP 2:
VEHICLE PREPARATION
NOTE: Install the antenna as high as possible from the ground
2.1
Remove any obstructions if required to access the interior (eg: bottom shield, wheel well shield).
2.2
Locate the antenna on a vehicle frame that is connected to the main body to ground the
antenna tuning box.
BOTTOM SHIELD
The antenna whip should reach
an inside surface of a
nonmetallic
bumper
Have a reachable
access for tuning
screws
ANTENNA WHIP
INPUT CABLE
VEHICLE FRAME
TUNING BOX
WHEEL WELL SHIELD
VEHICLE FRAME (INSTALLATION AREA)
•
The most important part of the installation is to determine the antenna location on a vehicle.
•
An SUV will have more open areas as opposed to a low-profile sport vehicle.
•
The most ideal locations for a single and dual antenna installation are shown below.
SINGLE ANTENNA VERSIONS
OPTION 1
OPTION 2
DUAL ANTENNA VERSIONS
OPTION 3
OPTION 4
006842 ISS-1
006842 ISS-1
