6
●
●
The
7
●
●
●
●
Press this button can select left & right swing angle. Fan blow angle can be selected
circularly as below:
Press this button can select up & down swing angle. Fan blow angle can be selected
circularly as below:
Note:
●
no display
(horizontal louvers stops
at current position)
When selecting " ", air conditioner is blowing fan automatically. Horizontal
louver will automatically swing up & down at maximum angle.
When selecting "
、
、
、 、
", air conditioner is blowing fan at fixed
position. Horizontal louver will stop at the
fixed position.
When selecting "
、 、
", air conditioner is blowing fan at fixed angle.
Horizontal louver will send air at the fixe
d angle.
Hold " " button above 2s to set your required swing angle. When reaching your
required angle, release the button.
When setting TIMER ON, TIMER OFF o
r CLOCK, press "▲" or " " button to
▲
adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons) When setting
TIMER ON, TIMER OFF or CLOCK, press "
▲
" or "
▲
" button to adjust time. (Refer
to CLOCK, TIMER ON, TIMER OFF buttons)
Introduction for buttons on remote controller
●
The function is only available for some model.
Press this button continuously more than 2s, the main unit will swing back an
forth from left to right, and then loosen the button, the unit will stop swinging and
present position of guide louver will be kept immediately.
Under swing left and right mode, when the status is switched from off to , if
press this button again 2s later, status will switch to off status directly; if press
this button again within 2s, the change of swing status will also depend on the
circulation sequence stated above.
●
so that the ambient temp. approachs the preset temp. as soon as possible.
▲
▲/ button
5
Holding "▲" or " " button, 2s lat
▲
er, set temperature on remote controller will
change quickly
. On releasing button after setting is finished, temperature ind
ica-
tor on indoor unit will change accordingly.
Press "▲" or
" " button once increase or decrease set temperature 1
℃
(°F).
If start this function, the unit will run at super-high fan speed to cool or heat quickly
1
2
