Sinclair KJR- 90D, Installation And User Manual

Page: 11 / 14

8
Please filed install the following accessory.
Number Name
Qty.
Remark
1
Install box
1
Universal electric cabinet specification,
pre-embed it into wall.
2
Shielded 5
-core cable 1
Pre-embed RVVP- 0,5mm
3
Wire configured tube (insulated
sheath)
1
Pre
-embed into wall, the longest
length should not exceeding than 15 m.
4
Philips screwdriver
1
5
Slotted head screwdriver
1
For unscrew the bottom cover of wire
controller.
3 Installation methods
1)
Cut off the connective wires for the signal received panel (accessory) from the
middle (no protecting sleeve part), divide to be A, B parts and the A part has big
5
-core connector as well as B part small 5-core connector.
2)
Connect the big 5
-core connector of the A part signal received panel connecting
wire group with the 5-core terminal of signal received panel, refers to the above.
3)
Please connect the other side (cut
-off side) of A part signal received panel with the
wall pre-bedded 5-core cable reliability, refers to the above.
4) Please connect the cut -off side of B part signal received panel with the wall
pre-bedded 5-core cable
reliability, refers to the right.
5)
Insert to the bottom cover
to the electric cabinet by
the accessory slotted head
screws and take down the
bottom cover of wire controller
refers to the right.
6)
Adjust the lenght of two plastic
bolts base on the length of through
A
B
D
E
C
Connective wires for the signal received panel (accessory)
The shielded 5-core wire pre-embedded into wall
part A
Signal received panel
A
B
D
E
C
The shielded 5-core wire
pre-embedded into wal
part B
x5 into wall 2
For install Cruciform slot screw.
Connecting wires of two sides
in digital display pipe must be
connected one to one.